2020-2021 Dynafit Hoji Pro Tour

Boot: 2020-2021 Dynafit Hoji Pro Tour

Stated Flex: 120

Available Sizes: 25-30.5

Stated Last (size 26.5): 103 mm

Stated Range of Motion: 55°

Stated Forward Lean: 11°

Size Tested: 26.5

Boot Sole Length: 291 mm

Blister’s Measured Weight (production boot):

  • Shells, no liners: 1174, 1169
  • Liners, no footbeds: 215, 214
  • Total weight per boot: 1389, 1383

Buckles:

  • 1 traditional upper buckle
  • 1 ratchet-style ankle buckle
  • 1 reversed toe buckle

Powerstrap: Cam-style

Shell Material:

  • Cuff: Grilamid
  • Shoe / Clog: Grilamid

Soles: Fixed rockered Pomoca rubber

Binding Compatibility: Pin-style “tech” bindings with a pin heel

Tech Fittings: Dynafit-certified Masterstep Inserts

MSRP: $800

Skis / Bindings Used:

    • DPS Wailer A112, 184 cm / G3 Ion 12
    • DPS Cassiar A95, 178cm / Dynafit Speed Radical
    • DPS Wailer A110, 184cm, Dynafit Radical 2.0

Test Locations: NW Montana backcountry

Reviewer: 5’8”, 195 lbs

Days Tested: 30

[Note: Our review was conducted on the 18/19 Hoji Pro Tour, which was not changed for 19/20 or 20/21.]

Dynafit Hoji Boot on Blister Gear:30 Podcast
Dynafit Hoji Pro Tour
Review Navigation:  Specs //  Intro //  Weight //  Fit //  Design //  Uphill Performance //  Dowhnhill Performance //  Binding & Crampon Compatibility //  Bottom Line

Intro

The new era of touring boots seems to be focused on two things: simplified design, and strong downhill skiing performance. Removable tongues are mostly a thing of the past, and slick ski / walk modes are all the rage. And as their contribution to this category, Dynafit is releasing a new “Hoji” line of boots.

We talked pretty extensively with Eric Hjorleifson himself about the new boots on our GEAR:30 podcast, and that conversation is definitely worth a listen for more info on the origin of the project and the whole Hoji boot line.

Since this review first went live, we’ve talked with Hoji again (twice, in fact), about the Hoji movie and also the newest addition to the Hoji boot line, the Hoji Free.

David Steele reviews the Dynafit Hoji Pro Tour for Blister.
David Steele in the Dynafit Hoji Pro Tour.

Dynafit, in their initial release, put out two big statements about the Hoji boots. First, they state, “A ski touring boot geared more for the climb or for the descent? As of Winter 2018-19, this basic ski touring question will finally be a thing of the past because the Hoji touring boot has turned the question of ‘either-or’ into simply ‘and.’” So during my testing of the Hoji Pro Tour (the stiffest and lightest boot in the Hoji line), I’ve paid particular attention to the balance of the boot — is it more of an uphill-oriented boot, a burlier downhill boot, or truly both as Dynafit claims?

Dynafit also says that with the “patented Hoji-Lock System, you get a direct connection between upper and shell — the flex between the two elements now is a thing of the past. The result is downhill performance just like you get with an alpine ski boot.” More interesting claims there, and in particular, the part about “downhill performance like you get with an alpine ski boot.”

So does the Hoji Pro Tour deliver on Dynafit’s claims? After getting four days in the pre-production boot and around twenty-six days and just shy of 50,000 ft of touring in the production version, here’s what I’ve found.

Note: Pre-Production vs. Production Hoji Pro Tour

The Hoji Pro Tour I tested first was slightly different than the production version that is on the shelves this year. I’ve now spent a lot of time in the production boot, and have detailed below the notable differences.

Weight & Comparisons

The Hoji Pro Tour is very light, especially for a boot that’s supposed to ski like an alpine boot. The Hoji Pro Tour I tested is significantly lighter than the Atomic Hawx Ultra XTD 120, and also lighter than several of the 130-flex touring boots out there.

For reference, here are our measured weights for some other notable touring boots (keep in mind the size differences). Our measured weights show the mondo size of the boot, then the weight of each shell. Then the weight of each liner. Then the total weight for shells + liners, listed in grams:

Scarpa Alien RS (28.0): 779 & 781 + 209 & 210 = 988 & 991 g
Fischer Travers Carbon (27.5): 890 & 896 + 174 & 174 = 1064 & 1070 g
Dynafit TLT7 Performance (28.5): 910 & 914 + 155 & 155 = 1065 & 1069 g
Atomic Backland Carbon (27.5): 907 & 915 + 260 & 255 = 1167 & 1170 g
Salomon S/Lab X-Alp (27.5): 977 & 980 + 213 & 214 = 1190 & 1194 g
Scarpa Maestrale RS (24.5 / 25.0): 1053 & 1057 + 244 & 245 = 1297 & 1302 g
Tecnica Zero G Tour Pro (26.5): 1099 & 1100 + 210 & 211 = 1309 & 1311 g
Dynafit Hoji Pro Tour (26.5): 1169 & 1174 + 214 & 215 = 1383 & 1389 g
Atomic Hawx Ultra XTD 130 (26.5): 1128 & 1127 + 300 & 305 = 1428 & 1432 g
Salomon MTN Explore (26.5): 1126 & 1135 + 281 & 281 = 1407 & 1416 g
Scarpa Maestrale XT (26.5 / 27.0): 1258 & 1258 + 247 & 252 = 1505 & 1510 g
Head Kore 1 (26.5): 1132 & 1136 + 392 & 393 = 1524 & 1527 g
Salomon S/Lab MTN (26.5): 1257 & 1246 + 288 & 303 = 1545 & 1549 g
Fischer Ranger Free 130 (26.5): 1204 & 1204 + 348 & 351 = 1552 & 1555 g
Atomic Hawx Ultra XTD 120 (26.5): 1157 & 1161 + 419 & 417 = 1576 & 1578 g

Fit

As we always note in boot reviews, we believe that going to a good bootfitter is perhaps the best thing you can do to make skiing fun and comfortable. Because if your feet don’t fit well in the Hoji — or any other ski boot — no nifty new tech is going to make up for a poor-fitting, painful boot.

As for me, I have wider, higher-volume feet, a high arch, and a high instep. And my feet work pretty well with the Hoji Pro Tour. Which is to say that it’s time for the wide-footed ski tourers of the world to rejoice — the stated interior last width of the Hoji Pro Tour is a remarkably roomy 103 mm, and it feels like it.

In the preproduction version, I stuffed some higher-volume Superfeet Red insoles into my pair of the Hoji Pro Tour and was very happy right off the bat with overall volume around my toes (where I had room to wiggle them), as well as the room over my instep. To complement this, the Hoji Pro Tour has what feels like a medium-width heel pocket that fit snug on my larger feet.

The production version of the Hoji fits tighter around the forefoot, in the arch, and also in the lower ankle. The new liner seems to be the reason for this, and it’s certainly more padded and beefier than the pre-production liner. I swapped my red Superfeet (high volume) for green Superfeet (medium volume), which still provides the arch support I want but gives me enough room in the production boot for a comfortable fit.

For comparison, I didn’t punch or heat mold the Atomic Backland Carbon (stated last width 98 mm), and they unsurprisingly did not feel as roomy as the Hoji. The lower shells of the Dynafit TLT Speedfit and TLT6 (black and orange version) are also noticeably lower-volume than the Hoji. If you like narrower boots like the TLT5, early TLT6, or Salomon S/Lab X-Alp, you’ll probably find the Hoji Pro Tour to be much too roomy in the lower shell.

While the lower shell of the Hoji is quite voluminous, the ankle and cuff are not. With my larger legs and calves, I found the calf area of the Hoji Pro Tour to feel more snug than most of the other touring boots I’ve used (e.g., Salomon MTN Explore, Salomon S/Lab X-Alp, Atomic Backland Carbon, Dynafit TLT6, and Dynafit Speedfit). And I noticed this when the Hoji Pro Tour was both buckled and unbuckled.

Even after molding the production liner and fully breaking it in, I still wasn’t able to get the extra calf room I wanted. More on that below.

“Hoji-Lock” Mechanism & Buckle Layout

Easily the coolest feature with the Hoji line of boots is the “Hoji-Lock” ski / walk mechanism. Flip the lever on the back of the cuff from walk to ski mode, and four things happen:

  1. A cable tightens the adjustable powerstrap.
  2. A cable tightens the upper cuff buckle.
  3. An internal sleeve in the cuff slides down and plugs the gap between lower shell and upper cuff, which determines the forward flex of the boot.
  4. A bar in the back of the upper cuff slides down, preventing the cuff from moving backward.

Check out this video for a visual demonstration of how the Hoji-Lock system works:

All this means that, if you keep all your buckles at the same tightness on the up and down, then the only thing you need do to switch from going up to skiing down is flip the switch on the back of the boot. It’s that easy.

Even if you do fiddle with the lower buckles during transitions, they’re excellent. A ratcheting strap secures my heel into the pocket without crushing the navicular area (this design is similar to what Scarpa has done on the Maestrale and Spirit4 before it, and is one we very much like).

Dynafit Hoji Boot on Blister Gear:30 Podcast
Dynafit Hoji Pro Tour — Toe Buckle and Ankle Strap.

A simple buckle over the forefoot tightens up the toe box, and it’s reversed to decrease the likelihood of it getting knocked open while scrambling. I tend to keep this on its loosest setting and not mess with it at all while touring. I’m a huge fan of both the ankle strap and lower buckle, and feel like this is a perfect setup for a touring boot.

Other Features

The Hoji Pro Tour’s 11° forward lean is relatively upright — more so than the Maestrale line of boots from Scarpa (both the new and old versions), the Dynafit TLT6 and TLT7. The forward lean of the Hoji Pro Tour feels similar to the Salomon S/Lab X-Alp and Atomic Backland Carbon.

Up front, the Hoji Pro Tour features Dynafit’s “Speed Nose” design and their Masterstep fittings. The Speed Nose lacks any sort of toe welt, which means that the pivot point of the tech pins is closer to the foot, allowing for a more natural stride. But as I’ll get into later, the Speed Nose causes some noteworthy disadvantages when it comes to compatibility with bindings and crampons.

In the back, the Hoji is equipped with a bolt-through Dynafit Masterstep tech fitting, meaning that it should theoretically be more durable than the heel tech fittings on most other boots that come simply screwed into the plastic of the shell’s heel.

The Hoji Pro Tour’s upper powerstrap features the Dynafit cam lock, which I believe should be standard on every boot given how well it holds and releases compared to traditional velcro straps. The lower-end Hoji PX and Hoji PX W features traditional velcro powerstraps.

The Hoji Pro Tour’s entire tongue cover pivots forward, which makes getting into and out of the boot very easy, even when the boot is cold. This system is very reminiscent of the old Scarpa Maestrale. However, because the plastic tongue and liner tongue all need to be aligned with the edges of the liner, it can be a bit tricky to get all the different parts lined up correctly. I was wary of snow getting in between all those pieces, but after getting many days in the production boot, I haven’t had any alignment issues whatsoever with the tongue. It’s snowproof and excellent.

Uphill Performance

So, does the Hoji Pro Tour walk well?

Definitely.

The Hoji Pro Tour’s 55° of stated range of motion (ROM) delivers a smooth, dextrous ride that’s very close to friction-free. Those used to lighter, more uphill-oriented touring boots (e.g., Atomic Backland Carbon or Salomon S-Lab X-Alp) will find that the Hoji Pro Tour has noticeably less rearward ROM. But for a boot of this weight (and that skis this well — see below), the Hoji Pro Tour walks exceptionally well, and I was able to get over my toes easily while skinning when I wanted to.

I personally haven’t been able to get the Hoji Lock system to function as intended while skinning on long uphills. Dynafit makes quite a big deal about touring in the boot with the upper buckle and powerstrap set to downhill tension, then simply flipping the walk lever in the back, which then extends the cables attached to both the upper buckle and powerstrap to achieve the looseness you want for going uphill. They are understandably excited about this because, in theory, it makes transitions quicker and far less finicky.

David Steele reviews the Dynafit Hoji Pro Tour for Blister.
David Steele in the Dynafit Hoji Pro Tour, NW Montana Backcountry.

But this hasn’t quite worked for me — the cables actuated by the lever simply didn’t open the upper cuff wide enough to keep my (fairly large) legs and calves comfortable and cramp-free while touring. Cooking liners, messing with buckles, or shifting the tension on the adjustable walk-mechanism lever didn’t fix this — for me, there’s simply not enough overall travel in the mechanism to be “loose enough to tour” on the uphill and “fully locked in” on the down.

David Steele reviews the Dynafit Hoji Pro Tour for Blister.
David Steele in the Dynafit Hoji Pro Tour.

My local ski area (after it closes for the season) requires 2000 ft of sustained uphill travel to access the backside and (usually) better snow. For a long, sustained skintrack like this, I set the Hoji-Lock lever in walk mode, and then leave the upper strap as loose as possible and don’t buckle the upper cuff at all. These settings left my upper leg free to move, and didn’t lead to cramping.

I’ve tried to use the system as designed many times since my initial testing, and every time I revert to fully loosening my upper buckle and power strap.

I suspect that folks who have lower legs and calves that are less large than mine will not have this issue. My lower legs and calves are pretty beefy. And since I’ve never been able to tour with the upper cuff even close to cinched on any boot I’ve used, I’d say my legs are probably extra-sensitive to this.

Downhill Performance / Flex Rating

Remember when Dynafit said that the Hoji delivers “downhill performance like you get with an alpine ski boot”? Well based on all the time I’ve spent in the boot, I think that statement is accurate.

All of my initial days in the Hoji Pro Tour featured strange, gooey, and crusty late-spring conditions, where the snow surface was unconsolidated, refreezing, or punchy. It wasn’t easy skiing, and would have been tricky in a lighter touring boot, especially one with a soft flex. Since then, I’ve skied bumps, groomers, and oodles of backcountry pow.

When locked into ski mode, the Hoji is not what I would call a “soft” flex, but it’s also not as stiff as some of the numerous more downhill-oriented touring boots on the market.

David Steele reviews the Dynafit Hoji Pro Tour for Blister.
David Steele in the Dynafit Hoji Pro Tour.

Dynafit has assigned the Hoji Pro Tour a flex rating of 120, and that seems a bit generous given that the Hoji Pro Tour feels just a little stiffer than the Salomon MTN Explore, which has a stated flex of 100 (though we at Blister think that it feels closer to a 110). The Hoji Pro Tour is far, far softer than the Scarpa Freedom RS (which has a stated flex of 130, and is one of the stiffest A/T boots we’ve ever reviewed). And finally, the Hoji Pro Tour is slightly softer than the new Scarpa Maestrale RS (stated flex of 125).

But where the Hoji Pro Tour stands apart — especially for a touring boot — is in the progressive nature of its flex pattern. It’s a buttery smooth ramp up — the fairly soft initial flex just gets firmer the more you push into the front of the boot. This makes for a lively, energetic boot that inspires confidence while going fast, jumping off knolls, and skiing hard in challenging conditions.

David Steele reviews the Dynafit Hoji Pro Tour for Blister.
David Steele in the Dynafit Hoji Pro Tour, NW Montana Backcountry.

Unlike many touring boots, the Hoji Pro Tour’s flex pattern doesn’t have that (awful) feeling of “hitting a wall,” and then blowing through the flex. So I think it’s fair to say that the downhill power and the progressive nature of the Hoji Pro Tour’s flex is similar to inbounds boots. But in terms of overall stiffness, I think the Hoji Pro Tour is a bit soft for a “120-flex” boot.

Binding Compatibility / Hoji Pro Tour as a “50/50” Boot?

Given that it tours well and skis well, there is certainly some potential for using the Hoji Pro Tour as a crossover boot for skiing both the resort and the backcountry. However, Dynafit says that the Hoji Pro Tour is only compatible with tech bindings that have traditional pin-style heels, so the Hoji Pro Tour’s back heel welt isn’t designed to be big enough to accomodate a Marker Kingpin or Salomon / Atomic Shift. Fritschi does say that the Hoji boot will work with the Tecton and Vipec Evo, though the Hoji’s “Speed Nose” does limit the Tecton and Vipec’s range of motion while touring compared to boots with traditional toe welts.

I think that it’s unfortunate that Dynafit has pigeon-holed the Hoji Pro Tour in this regard, especially given that other similar boots (e.g., Scarpa Maestrale RS, Salomon S/Lab MTN, and Atomic Hawx Ultra XTD) are all fully compatible with a wider range of more downhill-oriented bindings.

For those who want an even stiffer boot that is compatible with bindings like the Kingpin and Shift, Dynafit is releasing the 19/20 Hoji Free, which reportedly addresses both of those issues. You can hear more about that boot here.

Crampon Compatibility

The other issue with the Hoji Pro Tour comes with crampon compatibility. I opted to leave the Hoji Pro Tour behind on a five-day ski traverse on the Wapta Icefield because none of the three pairs of crampons I own (the automatic Black Diamond Sabretooth Pro and the semi-automatic Camp Stalker and Petzl Irvis Hybrid) seemed to fit well on the Speed Nose due to its width and lack of a toe welt. Dynafit does say the Hoji Pro Tour is compatible with most semi-automatic crampons, so there may be options that do work better. But I haven’t been able to get a very secure fit with the crampons mentioned above.

The Hoji Pro Tour is compatible with the Salewa Cramp-In system that they debuted this year. The Cramp-In crampon is definitely interesting and comes in at a ridiculously light stated weight of 260 grams per pair. The Cramp-In system utilizes a front connection that must be installed directly into the sole of the boot. I’m personally skeptical of any design where a crampon can potentially come loose, but we’re hoping to review the Cramp-In system soon, and will report back on how it performs. But the main point here is that the Hoji Pro Tour is not as compatible with as many crampons compared to boots with traditional toe welts

David Steele reviews the Dynafit Hoji Pro Tour for Blister.

Durability

Having put thirty days on two sets of boots (four on the first, twenty-six on the second), I’ve found the durability of the Hoji Pro Tour to be quite good. The only issue I’ve yet seen is a bit of shredding in the stitching of the fabric in the upper part of the tongue. My habit of not using the Hoji lock in its standard configuration could be the cause of this. I’ll report back if I notice any further issues down the line.

Who’s It For?

The Hoji Pro Tour walks well, skis well, and has a nice, progressive flex, but it isn’t compatible with more downhill-oriented bindings, so it’s best for skiers who want good uphill and downhill performance but are going to use it with full tech pin setups. The Hoji Pro Tour is stiff enough and progressive enough to ski pretty hard, but it is certainly not among the stiffest touring boots on the market. The other noteworthy feature is the wide last — folks with big feet will likely find the Hoji Pro Tour very comfortable, but people with narrower feet will probably be swimming in it.

Bottom Line

If you’re looking for a wide touring boot that walks well and has a nice, progressive flex, you don’t require maximum stiffness, and you only ski pin bindings, then the Hoji Pro Tour could be an excellent option.

Share this post:

22 comments on “2020-2021 Dynafit Hoji Pro Tour”

  1. Fingers cross that a more resort compatible version is made. Coming from a place where I have to fly before I can ski I’m not going to take two sets of boots with me and I don’t want to walk for all of my turns. I know I’m therefore not the target audience. I also understand what Hoji wanted to achieve with the binding points being so close to the ball of the foot (after listening to the Blister podcast with him) but I love the high volume design as I often really struggle in this area and do on occasion walk for my turns.

        • Yeah, I ended up buying a pair of the Hoji Pro Tours – too early I’m afraid. Worst thing is, it seems I won’t get to use them for at least another 12 months now. Nor the skis I bought to use with the boots. I haven’t bought skis in many, many years but needed to buy some due to the speed nose… Still, after listening to the last Blister podcast with Hoji (where he talks about the updated model), it sounds like they’re reducing the volume which is unlikely to suit my foot anyway. Walking around my apartment in the boots felt pretty good, and that’s without heat moulding etc which I’ll do once I finally get back to the snow.

          • Carl,

            Why did you have to buy new skis due to the speed nose on these boots? I am under the impression that this only affects binding and crampon compatibility.

    • Mike,

      Thanks for bringing that up.

      There’s some confusion here, as Black Diamond claims that the Tecton is compatible, but Dynafit does not officially give their approval for that kind of use. My sense is that if you want to go for it, it’s at your own risk, but I’d prefer to have a heel welt that was designed by the manufacturer to work with the kind of binding I’m using.

      Cheers,

      David

  2. Hi Dave,
    I wonder if the production version is a bit different as I found a different story on flex?” I tried on a 28.0 in the Hoji Pro-tour yesterday for about an hour in a local shop yesterday. I was hopeful based on the descriptions, but the flex was a deal breaker for me. Firstly I found it quite low volume – which is good for my moderately low foot. In fact, I could not get my foot in with the liner in the shell – however, putting the liner on my foot first and then slipping the entire unit in worked well to get past the low and stiff instep wings. Buckles all great and the Hoji lock seems to work as well or better than the Ultra lock on my 2014ish Dynafit PX’s. Agree a bit narrow in the ankle and cuff area – again good news for my foot. However the flex (or lack of) was an issue for me. When in ski mode the upper cuff is indeed stopped dead against the lower unit so I could not get the cuff to move/flex at all. An absolute wall. Any “flex” was only achieved by my leg, moving in the cuff (especially if I left the buckle loose or even undone). May be good for a skimo racer doing mach speed on groomer, but too rigid for the powder skiing I would be using it for. I am wondering if there is a hack to allow the cuff to actually flex a bit by grinding away the lower cuff wings that the upper locks against? or cutting a releif slot in the lower cuff wings so they give a bit when the upper pushes against it? To expensive an experiment for me to take on, but I would be interested to hear other opinions. Thanks, Bill

    • Hi Bill,

      Thanks for your thoughts here.

      All the skiing included in this review was done on the preproduction Hoji Pro Tour Limited Edition, although I’ve got the production model on hand and just did a bit of flex testing clicked into a ski on the carpet to double check my assertions here.

      To me, at 5’8″ and 195, I feel a consistently progressive flex in both the preproduction and production versions (the flex feels exactly the same to me). This is especially true compared to many of the light touring boots I’ve used (the Atomic Backland Carbon, Dynafit TLT6 and Speedfit), which tend to either be a concentrated wall that gives out, or a soft flex all the way down, and fits with the flex relative to the MTN Explores and Freedom RS that I have on hand. I’d certainly expect that folks who weigh less than I do may find the boot to be stiffer in flex.

      I find flexing boots not clicked into a ski to be a dubious process, because I simply can’t lean into them as far as I’d like.

      I’d definitely agree that the production model feels lower volume around the foot, especially since the liner on the production model has much thicker foam. I’ll be curious (and hopeful) that it gains a lot of volume there after cooking it, since that’s what my hobbit feet like.

      Cheers,

      David

  3. Hey David, thanks for an informative article. I have a couple of questions. First, if you’ve tried it, how do you think the flex of the Hoji compares to the Hawx 130? I just tried the Hoji on in the shop, and I kind of thought it might have felt stiffer than I remember the Hawx being. Second, having fiddled with the cable walk system a bit, does the durability of it worry you at all? When I switched it into ski mode, I was imagining popping a cable on the top of some steep couloir or deep in the backcountry, which of course would be about the last thing you’d want. Thanks!

    Cheers,

    Jackson

  4. Funny thing. This boot changed every thing I know about boots. My alpine boot is a tecnica mach 1 130 lv with zip fit gara liners. Bought a pair of the pre production hoji boots from backcountry. Put intuition pro tour liners and had custom insoles made for them. I have a hard time distinguishing the performance between the two. Have a pair of moment 184 bibby pros mounted with g3 ion 12’s and a pair of 190 moment bibby pros mounted with look pivots. In most conditions they ski the same. A little better in cut up snow with the alpine set up maybe just a tad more stable. Put the tecnica’s on one foot and the hoji’s on the other, could have skied them that way! Same forward lean, same flex. Granted neither had a stock liner. Not sure about stated flex or lean, just my opinion after skiing both. Thought tecnica mach 1 lv 130 with zipfit gara liners couldn’t get much better but this boot just blows me away. granted the pre production liner sucked, but with the intuition pro tours skis awesome.

    • David, I have and love the Mach 1 LVs for ski patrol out east. I’m looking for an AT boot for strictly backcountry, but discarded the Hoji because of the 103mm last. How can they feel the same boot as the LVs? Real curious of what else you have to say, you think it’s just the custom liner? Should I try on a pair of the Hoji?

  5. I have recently had a few issues with the boot that I was wondering if others had experienced.

    1) Because of the speed toe in no longer straps on the full dynafit ski crampons and the most important tooth does not get pushed into the snow surface.

    2) Snow build up from from skiing on the toe, triggers the binding release when quickly maeuvered on kick turns since the speed toe full articulated forward has almost zero breathing room from the release.

    Hit me back if you have had theses issues. I am tempted to move on after only a month.

  6. Can anyone speak to the volume and instep height compared to the TLT7? I’ve been having some pressure issues on the top of my foot and was hoping that the Hoji would be a solution.

  7. I tried on the Dynafit Hoji Pro Tour Women’s boot yesterday. It felt comfortable. I’m concerned about the 11 degree forward lean. This seems really low. How does it affect the downhill performance and comfort position for downhill?

  8. Seems somewhat disconcerting that these boots are somewhat limited to binding compatibility. Don’t get me wrong, I tried on six pairs of boots prior to trying these one. Without a doubt, the were and still are the most comfortable boots that I own. They charge well at the resort. Fortunately enough I have a pair of G3 Ions that work well with the boot. Though with the price point I don’t want to modify them to work with the dynafit beasts that I have.
    Am I to presume that the Pro Tours won’t work with the Dynafit beast?

    • Unfortunately, Dynafit says that neither the standard Hoji boots (e.g., Hoji Pro Tour) or the new Hoji Free are compatible with the Beast bindings. The new Hoji Free is compatible with MNC bindings like the Shift and then also bindings like the Marker Kingpin, since the Hoji Free has a larger toe and heel welt. But non of the Hoji boots are compatible with Beast bindings due to the structure of the boot around the heel.

  9. I was, until reading this and other threads, confidently under the impression that the Master Step heel of both the Pro Tour and the Free made them compatible with Beast, even without having to modify the heel with the horseshoe insert. I believe that’s Dynafit’s claim.
    “This technology is called Master Step, is patented and makes the boot compatible to the beast binding, as well as regular tech bindings without having to do any modifications.” (https://www.sport-conrad.com/blog/en/the-new-dynafit-beast-16-light-product-test/).

    I’m quite confused now by these different opinions on compatibility. I have a new pair of the Beast 16s that I got for quite cheap (perhaps now I see why lol), and have been shopping boots. I’m looking to buy either the Pro Tour or the Free. But now I’m on hold until I can get this sorted. Any help on this would be massively appreciated.

    • Hi Raoul,

      Did you ever get the beast-Hoji compatability sorted? I am a couple years behind you but looking to get the Hoji’s as well but have the beast16’s

      Cheers,
      Tenaya

  10. Hi David — I have the Hojis and generally love them but agree the ankle / calf are tight and now in my 2nd season causing discomfort / bruising on ankles which gets pretty miserable by Day 4 on the tour. Tried getting them punched but no real progress. Sounds like you share wide ankles/calves — which boots have you found to have most volume there? My feet are actually fairly normal size so don’t need a super wide last — just more ankle/calf space. Thx!

  11. I too have a pair of Hojis that I started using this year. Excellent on the uphill but after a few miles and ready for the downhill my ankles are killing me and I’m having issues really leaning into turns with the able pain. I tried punching them with no luck as the plastic is thin. Wondering if anyone know another boot that has more ankle room or if I should try a foot bed and maybe try baking them again.

  12. As another commenter stated I found the flex to be non-existant in these boots. maybe it’s due to the bootfitter having to raise the instep for me, but these boots are a wall with absolutely zero deformation no matter how much I lean into them.
    Combined with the quite low and stiff cuff I feel like i’m going to snap my ankles when I lean forward. I couldn’t detect this issue in the shops since my heel wasn’t locked down. Super disappointed in these.

Leave a Comment