2018-2019 DPS Wailer 106 Foundation

Jonathan Ellsworth reviews the DPS Foundation 106 for Blister Gear Review
16/17 DPS Wailer F 106

Ski: 2018-2019 DPS Wailer 106 Foundation, 185 cm

Available Lengths (cm): 168, 178, 185, 191

Actual Tip-to-Tail Length (straight tape pull): ~183.5 cm

Stated Dimensions (mm): 142-106-125

Blister’s Measured Dimensions (mm): 141-106-127

Blister’s Measured Weight per Ski: 1978 & 2015 grams

Stated Sidecut Radius (185 cm): 18 meters (tri-radius: 19 underfoot, 17 tip and tail)

Tip / Tail Splay (ski decambered): ~55 mm / ~26 mm

Traditional Camber Underfoot: 1-2 mm

Core Construction: Bamboo & Poplar + Fiberglass & Carbon

Factory Recommended Line: ~8.65 cm behind center; ~83.1 cm from tail

Mount Location: Recommended Line

Boots / Bindings: Fischer RC4 130 / Salomon Warden 13

Days Tested: 6

Test Location: Taos, NM

[Note: Our review was conducted on the 16/17 Wailer Foundation 106, which was not changed for 17/18 or 18/19, apart from graphics.]


DPS has just released a new addition to their Wailer family: The Wailer 106.

The Wailer 106 will be available in DPS’s “Pure3” construction, and it is also available in DPS’s new “Foundation” construction.

The Foundation construction is a reworked version of DPS’s “Hybrid” construction. I won’t go too deep into the construction right now, but suffice it to say that we’re looking at similar materials laid out a bit differently: bamboo and poplar + fiberglass and carbon.

DPS is positioning the Wailer 106 as a ‘do anything’ ski, a one-ski quiver. Width wise, the Wailer 16 falls right between the DPS Wailer 99 and the Wailer 112RP, and those two skis will provide some useful reference points.

One more thing: DPS is positioning this ski as best suited for Intermediate-to-advanced skiers, and I think that’s right. But hopefully my comments throughout this review will flesh out what that means, and I’ll say more about this in particular in my “Who’s It For?” section.

Flex Pattern

There’s quite a discrepancy between the tips and the tails of the Wailer 106 in the “Foundation” construction (will refer to this ski going forward as the Wailer “F” 106). The tails are on the stiffer side, call them a 7 out of 10. The shovels, however, are quite soft—call them a 4, and maybe even a 3 out of 10.


Take the Wailer F 106’s dimensions, flex pattern, and sidecut radius, and you know what you end up with? A 106mm-wide ski that carves the @!%# out of groomers. I really can’t overstate this: on decent, fairly smooth groomers, this ski feels as good carving turns as some of the sub-90mm-wide skis we’ve reviewed.

Jonathan Ellsworth reviews the DPS Foundation 106 for Blister Gear Review
Jonathan Ellsworth on the DPS Wailer F 106, Taos , NM.

Of course, the more roughed-up or icy the groomer gets, the less the width, flex pattern, and relatively short effective edge of the Wailer F 106 will be advantageous. So no, this isn’t going to replace your dedicated hard-snow skinny carver.

The Wailer F 106 wants to be on edge, all of the time. It skis short, so you can make quick, snappy turns on the ski, but it’s also comfortable running out medium-sized turns, too.

And if those groomers are a bit soft and in really good shape, I found that I could drive some pretty massive, stupid-fast turns. The Wailer F 106 definitely does have a speed limit (unlike the Wailer 105 Hybrid T2), but it is a high speed limit, and aside from the Wailer 105 Hybrid T2 battleship, this Foundation 106 has felt better and more damp to me than any DPS ski I’ve been on.

So if high-speed GS turns (50+ mph) are your top priority, I don’t think this is your ski. But if you have strong technique and a willingness / ability to work a ski, I think you’ll have a very, very good time on groomers on the Wailer F 106. On piste is where the ski got the biggest “WOW” out of me.


The Wailer F 106 isn’t a zipper line machine; the ski has too much sidecut for that. The more you detune the tails, however, the more easily you will be able to slide / smear the tails through bumps rather than carve (and finish) your turns through moguls.

But if you are willing to let the ski do the work (rather than bash your way through bumps with a lot of speed), and you carve around moguls at more moderate speeds then I’d say that the Wailer 106 is pretty compliant. Work with the ski, don’t force it to try to power through terrain.

All-in-all, if you are looking for a ski to make bumps as easy as possible, I think there are easier options. But if you already feel fairly comfortable in bumps and you take a more measured approach to them, I think you’ll get along fine with this ski.

Off-Piste Steeps

The Wailer F 106 feels quite at home in shallow chop and crud, as well as smooth conditions—whether smooth windscour or smooth, consistent pow. The Foundation construction feels much less reactive than DPS’s “Pure3” construction (their very lightweight construction that very much prefers smooth, consistent conditions.

Jonathan Ellsworth reviews the DPS Foundation 106 for Blister Gear Review
Jonathan Ellsworth on the DPS Wailer F 106. (photo by David Valerio)

By comparison, the Foundation construction is much more comfortable in everyday, resort conditions—it’s really not even close—and in the relatively steep trees of Taos’ Pollux, the Wailer 106 easily handled banging out turns at speed through the trees.

NEXT: Pow, Punchy Snow, Etc.

16 comments on “2018-2019 DPS Wailer 106 Foundation”

  1. Hi Jonathan,

    I saw the first pictures of this ski online about half a day before you published the review and I was – well to say it in the blister “slang” – intrigued. Now that feeling has changed into slight disappointment when reading your review. I was really hoping the wailer 106 F would fall into the category of the line SN 108, nordica enforcer or scott punisher 110, i.e. a smooth “no brainer” ski with a good blend of low end and top end capacities. Maybe a stiffer shovel and a 20 – 22 m sidecut and one would be getting closer what the first looks at the ski seemed to promise…

    PS: how to you like your sweet helmet (trooper in white is such a “classic”)? I love the brand – stoked to see that they are now on the US market.

    • Hi, Hannes – talking to Stephan Drake this past week, we got confirmation that they are going to stiffen up the shovels a bit, while leaving the tails the same. I think this is the right move. And we’ll see how much this affects performance. (And keep in mind that the Enforcer’s sidecut radius is only 18.5 meters…)

      As for the Sweet Trooper MIPS … it’s been terrific. Highly recommended. We’re going to be talking more about (and with) Sweet soon…

      • Hi Jonathan,

        Any update on the production model of the 106 F in relation to the envisaged stiffening of the shovels and if and how that affects performance?

        With regard to the pre-production model you have skied: how does the flex ramp up from the center to the soft tips? Is there any hinge point or is it a flex pattern that consistently gets softer? I think that the old 108 waisted line SFB is a good example of a relatively medium flexing ski with a yet very consistent flex pattern that carved very well and was quite predictable in variable snow for its quite centered mount and moderate flex. I have skied the new rmu apostle 98 several times this season which is quite stiff under foot and has softer tips and shovels (much softer than the regular apostle 105 I have also skied) and there is a hinge point where you pressure the shovel which gave me some violent folding experience if I did not stay quite balanced and centered. Therefore, the question is wether despite the soft tips the wailer 106 F remains relatively predictable or not when entering firmer or variable conditions if you do not push the ski too hard. I would infer from your review that the ski remains predictable, but you often comment expressly on that issue. Thank’s in advance!

        PS: any plans to get on the wailer 99 F?

  2. Thank you for the prompt feedback. Stiffer shovel? Getting (once more) intrigued…As for the sidecut radius, I see your point with the enforcer and I admit that the sidecut radius does not always matter that much (but it can…). With a stiffer shovel this could certainly become a contender for an everyday resort ski in the alps either in the playful charger category or playful ski that can still charge.

    As for sweet helmets. I still own a 1st generation trooper (PK Hunder edition in gold with an “immature” bikini girl print on the left backside of the helmet) and currently use a 2nd generation rambler – as the former “budget helmet” from sweet – which is now replaced by the blaster. The helmets are reasonably light, have a great fit, low profile, sufficient venting, are compatible with every goggle I was using, feel very solid and have a great design. No reason for me to look elsewhere. Curious to read what you have to say about the MIPS version (it appears it weighs only 30 grams more and if it really offers that much additional protection it is certainly worth considering).

  3. I think these skis have been available for purchase for several days now. Did they stiffen the tips already? Just curious since you said they are “going to”.

  4. Hi Jonathan,

    Thinking about grabbing a pair of these 106 wailer pure 3. I currently have a two ski quiver of 185 Nordica enforcer 100 and 185 DPS Lotus 124 pure 3. I am debating on upgrading the enforcers to the 106 (a buddy of mine wants to buy my enforcers). How would you compare the enforcers to the 106?



  5. I’m thinking of a Dps that would fit my needs, I ski the tight woods at Sugarbush and Cannon in the east.I’m 5’6 155.Would the foundation 106 or 99 fit my needs.Also on the new Dps Alchemist 1300 $ ski are these primarily for soft snow? Rick

  6. 2019-20 Wailer F106 C2 update.
    I have skied the previous F106 described in these earlier reviews, and now have the new and slightly narrower (tip and tail) F106 C2 185cm in my personal quiver. Both skis feel very similar, and I do like bamboo core skis. This length is appropriate for my 6’1″ 185 lb frame, mounted on the recommended scribe mark.

    -Groomed conditions: A SUPERB carver at all radius with amazing edge and large sweet spot. The more conventional side cut, gives it a longer effective edge. This ski falls into the directional category vs playful and loose. Loves higher edge angles and prefers to be on edge. This is “not” a top pick for those that ski with a flat edge, and prefer a skidded turn. It is best suited for the advanced to expert level skier. Very stable at high speed long radius turns. If you like to ski fast with high edge angles on groomers, you will fall in love with this new C2! This ski is in the heavier weight category (there is a direct relation with higher weight and higher damping-stability, which I prefer). Great stability and transition over inconsistent conditions, particularly if you stay on edge and closer to its turn radius. DPS does not specify the turn radius. I have seen some web sites list it at 18-19m for the C2. It feels more like low 20s in this 185cm length.

    -Powder: a more conventional side cut and moderate tip rocker, give this ski average float for this width underfoot. Many skiers will find this skis combination of stability and float adequate for most of their powder conditions, and can easily qualify as a single ski quiver, for East or West US conditions. I live in Vail, and will use the F106 as my wide all-mountain ski in my 4 ski quiver. I will normally switch to my wider-looser twin tip bamboo core powder ski in deeper conditions, probably 5-6 plus inches…..it’s just easier and more fun!

    -Bumps: excellent in wider soft bumps that you can carve through. Tight, large, firmer bumps that require a quick edge change and direct line, are more of a challenge, and the ski feels a bit stiff under foot, and a little slow to change edge in this 185cm length. I would prefer to be on a narrower, damp, quicker turning ski, like the Blizzard Brahma in a 180cm length in these conditions.

    -Crud-heavy cut up snow: the higher damping of the C2 Foundation series allow this ski to carve through these conditions with stability and confidence.

    P.S. I also love the solid blue top sheet! The 185cm Nordica Enforcer 110 was also a option to fill this slot in my quiver, but the top sheet graphics…..Yuk.

  7. Edge angles;
    Let me start by stating that this new C2 F106 185cm is the best all-mountain carving ski I have ridden, not to mention its soft snow-pow performance off piste! The Edge engagement is so progressive, linear, and smooth, with superb edge hold, encouraging effortless high edge angle carve turns.
    Tuning is critical on any ski, but some are more sensitive than others, and can make a HUGE impact on the skis performance. The new C2 F106 (per DPS hqts) uses .7 bottom and 1 degree side. I was not able to confirm the factory detuning on the tip and tail. All of the 5 or 6 recent DPS skis I have ridden were new or near new, and had a factory tune, and all were superb, some of the best in the business from the factory (I never let a shop tune my skis when new (which many shops recommend), I usually hand tune the entire first season, unless there is a obvious problem….and that has been rare). I do ski over 100 sessions per season, with my current 4 ski Quiver. The quality and accuracy of a shops tune can vary widely, and can negatively impact a skis designed performance.
    Prior to confirmation from DPS, I used 1 and 2 for the first tune, after about 1 dozen sessions, and did not take off much metal. It seemed a bit grabby, without additional edge hold, and some loss of that progressive, linear carve. I detuned the tip a bit more to the edge contact point when cambered, and feathered to the edge contact point when decambered. Pretty darn close after a few sessions….however, I will use factory angles next time, once my new Swix bottom jig arrives for that .7 degree bottom edge.

  8. Hi Pierre, if your asking about the F106 C2, I like these on the factory scribe mark. I do have Tyrolia demo bindings and can easily change the mount point, but feels just right on the mark. I am a directional skier 185lbs 6’1″, and this more conventional shape with its long effective edge is designed to be a directional ski. I think this 185cm length will easily support a heavier skier than me, especially with the heavier demo binding I have mounted, which also stiffens the ski due to the adjustment plates. This is a stiff ski for this width to begin with. Finest carving wide-all-mountain ski I’ve ridden on groomers, with amazing edge. Rides deep and stable on the big days for more face shots. Craig. Vail, Colorado

  9. Thank you Craig. My question is about the F106 in this article. Your reviews made me want to exchange the original F106 for the C2! I scored the last 185cm for a very great deal since the C2 was available.

    I guess that the C2 is improved but the feeling should be similar except maybe for firmer conditions.

    I am hesitating between mounting on the line or 1cm back.


  10. The F106 C2 prefers a weight forward stance driving the turn from the front of the ski, but has a large sweet spot. I would hesitate to move the mount point behind the scribe mark. Demo bindings will solve your concerns, and the added weight and plates will offer some additional damping and stability, since your a bigger guy. If you are working on, or have mastered your carve turns, you will love this ski. If you prefer skidded turns or a loose ski that lacks edge….look elsewhere. Cheers

Leave a Comment